PERMASIL® High Washfast Disperse Dye

PERMASIL® High Washfast Disperse Dyes for Polyester

These dyes provide exceptionally high wet fastness on all polyester fibers, including microfibers, in both atmospheric and high-temperature applications.

Selected PERMASIL® Disperse Dyes can also be combined with PERMABRIL® reactive dyes to produce bright, durable shades on polyester/cotton blends.

PERMASIL® High Washfast Disperse Dye	Xenon Light Fastness	Wash Fastness 2A (w/ Reduction Clear) Stain	Sublimation (360°F/30 sec.) Stain	Solvent Bleed	pH Range	Barré Coverage 1=V.Good 5=Poor	Suitability for Atmospheric Dyeing (w/ Carrier)	Suitability for Pad Thermosol Dyeing	Suitability for Poly/Wool Dyeing	Energy Level
PERMASIL® Yellow S6G 2.00%	Light 5 Heavy 6	Acetate 4 Nylon 4	Polyester 4-5 Cotton 4-5	5	4-5	3	Suitable	Suitable	Not Suitable	Med.-High
PERMASIL® Yellow CC 2.00%	Light 6 Heavy 6-7	Acetate 5 Nylon 5	Polyester 4 Cotton 4	4	3-6	1	Suitable	Not Suitable	Suitable	Med.
PERMASIL® Yellow BRLS 200% 2.00%	Light 7 Heavy 7-8	Acetate 4-5 Nylon 4-5	Polyester 5 Cotton 4-5	4-5	3-7	3	Not Suitable	Suitable	Not Suitable	High
PERMASIL® Yellow Brown S2RFL 2.00%	Light 5-6 Heavy 6	Acetate 4-5 Nylon 4-5	Polyester 4 Cotton 4	5	3-8	5	Limited Suitability	Suitable	Not Suitable	Med.
PERMASIL® Orange GFA 2.00%	Light 5 Heavy 5-6	Acetate 4-5 Nylon 4-5	Polyester 5 Cotton 5	5	3-8	5	Not Suitable	Suitable	Not Suitable	High
PERMASIL® Scarlet GPA 2.00%	Light 3-4 Heavy 4	Acetate 4 Nylon 4	Polyester 4-5 Cotton 4	4-5	3-8	3	Limited Suitability	Suitable	Not Suitable	Med.
PERMASIL® Red FTS 2.00%	Light 3 Heavy 4	Acetate 4-5 Nylon 4-5	Polyester 4-5 Cotton 4-5	4-5	3-6	3	Limited Suitability	Suitable	Limited Suitability	Med.
PERMASIL® Rubine GFL 200% 2.00%	Light 5 Heavy 6	Acetate 4-5 Nylon 4-5	Polyester 4-5 Cotton 4	4-5	3-6	3	Limited Suitability	Suitable	Limited Suitability	Med.
PERMASIL® Brilliant Violet B 2.00%	Light 7 Heavy 7	Acetate 5 Nylon 4	Polyester 4 Cotton 4	4	3-9	1	Suitable	Not Suitable	Limited Suitability	Med.
PERMASIL® Blue BG-CF 200% 1.00%	Light 7 Heavy 7-8	Acetate 4-5 Nylon 4-5	Polyester 4 Cotton 4	5	3-7	4	Suitable	Suitable	Not Suitable	Med.
PERMASIL® Blue XF 2.00%	Light 5-6 Heavy 6	Acetate 5 Nylon 5	Polyester 4-5 Cotton 4-5	4	4-5	3	Suitable	Suitable	Not Suitable	Med.
PERMASIL® Navy XF 2.00%	Light 5 Heavy 6	Acetate 5 Nylon 5	Polyester 4-5 Cotton 4-5	4	4-5	3	Suitable	Suitable	Not Suitable	Med.
PERMASIL® Black XF 4.00%	Light N/A* Heavy 6-7	Acetate 5 Nylon 5	Polyester 4-5 Cotton 4-5	4	4-5	3	Suitable	Suitable	Not Suitable	Med.

Colors May Vary Across Screens The shades illustrated on this website are intended to convey the general color characteristics of each dye and are not intended to be an accurate representation of how the finished dyeings will actually appear. Due to differences in computer monitors, screen resolutions and graphics cards, the colors displayed here may vary.

Procedures:

Dyeing at 140º

Pre-scour with 1& STANSCOUR® BRC at 160º for 20-minutes.

Drop & rinse.
Set bath at 90ºF with:
1. Xg/l salt (per chart below)
Add PERMARBIL® Reactive Dye (pre-dissolve in 160º-180ºF water).
Run 10-minutes.
Add 1/10 total amount of Soda Ash over 10-minutes.
1. Run 10-minutes.
Add remaining 9/10 Soda Ash over 10-minutes (pH 10.8-11.2).
1. Run 10-minutes.
Heat to 140ºF at 2ºF/minute.
1. Run for 45-minutes.
Sample.
1. If shade is acceptable, drop bath.
2. When sampling shade, swatch should be: rinsed cold, rinsed warm, and neutralized with 0.25% Acetic Acid. Then, scoured at 200ºF – see steps 12-18.
Rinse at 120ºF for 10-minutes.
1. Drop bath.
Rinse at 140º for 10-minutes.
1. Drop bath.
Neutralize at 120ºF with 0.25% Acetic Acid (pH 7-8).
1. Run 10-minutes.
2. Drop bath.
Set fresh bath to 120ºF.
Heat to 200ºF.
1. Hold 10-minutes.
2. Drop bath.
Set bath to 120ºF.
1. Hold 10-minutes.
2. Drop bath.
Finish as usual.

Salt and Soda Ash Recommendations for Cotton/Rayon

% Reactive Dye	g/l Sodium Chloride or Sodium Sulfate	g/l Soda Ash
0-0.25	30	5
0.26-0.50	50	5
0.51-1.00	60	10
1.01-2.00	60	10
2.01-3.00	80	10
3.01-5.00	80	10
Above 5.00* *When dyeing above 5.00% the yield should increase with use of 100g/l salt	80-100	10

PERMABRIL® Brill Blue R Special Requires Reduced Salt

% Reactive Dye	g/l Sodium Chloride or Sodium Sulfate
up to 0.50	20
0.51-2.00	30
2.01-4.00	40
Above 4.00	50